製作者：PoPoPyo

Thank you for your purchase. Please use this as a reference during assembly or when considering your purchase.

The side shape of the sides is quite similar to the Kone Pure Ultra, and the click area has a design similar to the MZ1.

Attention

The assembly can be done if you have the technical skill level required to disassemble the EGG OP1 8K.

Once you receive the printed parts, I recommend washing off the nylon powder first.

Using a toothbrush or an ultrasonic cleaner is effective when washing off the powder.

Required Parts

• Shell
• Click frame

• Main PCB (with cable)
• Switch PCB x2

• Large screws that secure the click PCB ×4
• Small screws that secure the main PCB ×3

Tool

• Driver (the one included with the OP1 8K is fine)

Assembly Instructions

1. Secure the main PCB with the cable attached to the shell. Use three small screws in the areas marked with blue circles. Tighten carefully to ensure the bottom surface is not warped.